smp4 - ryb ? industry standard plcc4 footprint ? 3 chips in one low profile package ? high luminous intensity ? wide viewing angle ? high power efficiency plcc4 smd top view package led smp4 - ryb, red/yellow/blue bivar reserves the right to make changes at any time without notice. bivar, inc. 4 thomas, irvine, california 92618, u.s.a. phone: (949) 951 - 8808 fax: (949) 951 - 3974 e - mail: bivar@bivar.com web: www.bivar.com revision c 10/13 page 1 of 5 caution: looking directly at led without shielded eyes may cause damage to retina. attention observe precautions for handling electrostatic sensitive devices rohs compliant moisture sensitivity levels 4 outline drawings notes: 1. all dimensions are in inches [millimeters]. 2. standard tolerance: 0.010" unless otherwise noted. outline dimensions part number material emitted color lumen typ. mcd lens color viewing angle smp4 - ryb algaas red 36 water clear 120 gaasp yellow 16 gan blue 50 bivar smp4 tri - color led combines three chips in a single package and is offered in an industry standard plcc4 footprint. the smp4 led has a water clear lens for high luminous intensity and wide viewing angle making them ideal for small scale applications such as illumination, general indication, and backlighting. the flexible three chip design allows for a wide variety of lighting options where the chips can be individually driven or mixed to create different color combinations. the robust package is ideal for harsh working envi- ronments and can be clustered in led arrays for high luminous applications. low power consumption and excellent long life reliability are suitable for battery powered equipment. bivar smp4 led is packaged in standard tape and reels for pick and place assemblies.
plcc4 smd top view package led smp4 - ryb, red/yellow/blue bivar reserves the right to make changes at any time without notice. bivar, inc. 4 thomas, irvine, california 92618, u.s.a. phone: (949) 951 - 8808 fax: (949) 951 - 3974 e - mail: bivar@bivar.com web: www.bivar.com revision c 10/13 page 2 of 5 radiation diagram directivity radiation t a = 25c unless otherwise noted electrical characteristics t a = 25 c & i f = 20 ma unless otherwise noted emitting color forward voltage (v) 1 recommend forward current (ma) reverse current (a) v r =5v dominant wavelength (nm) 2 luminous intensity (mcd) 3 viewing angle 2 ? ? (deg) typ max typ max typ min typ typ red 1.85 2.3 20 10 640 18 36 120 yellow 1.9 2.4 20 10 585 10 16 blue 3.3 4.2 20 10 466 20 50 1. tolerance of forward voltage : 0.05v. 2. tolerance of dominant wavelength : 0.1nm. 3. tolerance of luminous intensity : 15%. notes: 1. 10% duty cycle, pulse width 0.1 msec. 2. solder time less than 5 seconds at temperature extreme. notes: absolute maximum ratings t a = 25c unless otherwise noted power dissipation red, yellow - 72 mw blue - 100 mw continuous forward current red, yellow - 30 ma blue - 25ma peak forward current 1 100 ma reverse voltage 5 v electrostatic discharge classification (hbm) 2000 v derating linear from 25c 0.4 ma / c operating temperature range - 40 ~ +85c storage temperature range - 40 ~ +100c soldering temperature 2 260c
bivar reserves the right to make changes at any time without notice. bivar, inc. 4 thomas, irvine, california 92618, u.s.a. phone: (949) 951 - 8808 fax: (949) 951 - 3974 e - mail: bivar@bivar.com web: www.bivar.com revision c 10/13 page 3 of 5 typical electrical / optical characteristics curves t a = 25c unless otherwise noted plcc4 smd top view package led smp4 - ryb, red/yellow/blue blue yellow red red, yellow, blue red, yellow blue red yellow blue
bivar reserves the right to make changes at any time without notice. bivar, inc. 4 thomas, irvine, california 92618, u.s.a. phone: (949) 951 - 8808 fax: (949) 951 - 3974 e - mail: bivar@bivar.com web: www.bivar.com revision c 10/13 page 4 of 5 plcc4 smd top view package led smp4 - ryb, red/yellow/blue recommended soldering conditions outline drawings notes: 1. all dimensions are in inches [millimeters]. 2. standard tolerance: 0.010" unless otherwise noted. tape and reel dimensions note: 2000 pcs/reel
bivar reserves the right to make changes at any time without notice. bivar, inc. 4 thomas, irvine, california 92618, u.s.a. phone: (949) 951 - 8808 fax: (949) 951 - 3974 e - mail: bivar@bivar.com web: www.bivar.com revision c 10/13 page 5 of 5 plcc4 smd top view package led smp4 - ryb, red/yellow/blue 0.63 [16.0mm] packaging and labeling plan desiccant internal quality control label bivar standard packaging label humidity indicator card note: 1 reel / bag sealed esd and moisture barrier bag x.xxx x.xxx
|
